7209 Nachi Angular Contact Bearing Made in Japan

$35.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store irvineman
(206864) 98.8%,

Location: Anaheim, California
Ships to: US,
Item: 130377501970

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Type:Bearings
NACHI:NACHI
Pack#10019:Pack#10019
MPN:Pack#10019

Nachi Angular Ball Bearings 7209 45mm x 85mm x 19mm 40 Contact Angle Steel Cage Made in Japan 7209 Nachi Angular Ball Bearings, 40 Contact Angle, Steel Cage, Flush Ground, Made in Japan, here are the dimensions of the 7209, the 7209 inner diameter is 45mm, the 7209 outer diameter is 85mm, 7209 width is 19mm. Item: 7209 Angular Ball Bearings Dimensions: 45*85*19 mm/Metric ID (inner diameter)/Bore=45mm OD (outer diameter D1)=85mm Width/Height/thickness=19mm 7209 Type: Nachi Angular Ball Bearings Cage: Steel Cage Size: 45mm x 85mm x 19mm Made in Japan Quantity: One Bearing 7209 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads. Pack#10019